For any commercial kitchen, routine grease trap cleaning entails removing the grease and oil layer that is over the water, scraping the bottom, sides, and lid to remove any extra grease, and ladling off the grease and oil from the trap.
The size of a grease trap and the quantity of grease and oil inside the trap both influence how frequently it needs to be cleaned. A thorough cleaning should be done at least every 90 days for the best results. Through this article, we will share some tips and tricks that may help you to understand the benefits of regular grease trap cleaning .
What is a Grease Trap?
Before they enter a wastewater disposal system, most greases and solids are intercepted by a grease trap, a plumbing device. It is sometimes referred to as a grease converter, grease capsule, grease interceptor, or grease recovery device.
In order to stop fats, oils, and grease (FOG) from entering the sewer system, causing clogs, grease traps are frequently employed in industrial kitchens and restaurants.
Grease traps come in various designs, including gravity grease traps, automated grease traps, and passive hydromechanical grease traps.
Why is Grease Trap Important for Commercial Kitchens?
Commercial kitchens need grease traps because they stop fats, oils, and grease (FOG) from entering the sewer system and inflicting harm or damage. FOG can result in sewer system obstructions that result in backups and overflows, which can be expensive and time-consuming to repair.
Large establishments are frequently required to have grease traps installed on their property by health inspectors. Before wastewater enters the sewer system, grease traps are filtration devices that catch FOG and other waste. A grease trap can separate the various layers of waste with water by cooling warm or hot greasy water.
Benefits of Regular Grease Trap Cleaning
The health of the entire septic system, extending the septic tank’s life, lowering the danger of pollution, saving money on repairs and emergency maintenance, and eliminating foul odors are just a few advantages of routine grease trap cleaning.
Regular cleaning can also prevent the accumulation of toxic substances, enhance general safety in commercial kitchens, and produce a healthier and more sustainable working environment. Reducing the amount of waste that accumulates in the grease trap and interceptors, as well as the expense of cleaning and maintenance, can also be accomplished by proper food waste disposal through recycling or solid waste removal.
1. Prevents Blockages and Clogs
It’s critical to properly maintain your septic system to avoid damage. This entails using water wisely, disposing of trash properly, and examining and pumping the system at least every three years.
Maintaining a healthy septic system also requires routine grease trap cleaning since grease and oil can lead to issues, including the buildup of scum and sludge layers, which can lower the septic tank’s effectiveness and make pumping more challenging.
Grease and oil will not enter the septic tank with routine grease trap cleanings, maintaining the integrity of the entire system and extending the septic tank’s life. Avoid putting fats and oils directly into the piping system as well.
2. Improves Kitchen Sanitation
Routine grease trap cleaning can improve kitchen sanitation by reducing the likelihood of the trap overflowing into the building or the street and ensuring its effectiveness.
The substances move via a capturing system, where they have time to cool and harden while water continues to flow normally through the drain. Grease and oil will not enter the septic tank with routine grease trap cleanings, maintaining the integrity of the entire system and extending the life of the septic tank.
Moreover, clearing out excess grease and fat from the trap can stop blockages and fast buildups of debris.
3. Helps Maintain Compliance with Regulations
By avoiding clogs and obstructions in the plumbing system, which can result in environmental dangers and health risks, routine grease trap cleaning aids in maintaining compliance with standards.
In addition, thorough grease trap cleaning can prevent the accumulation of fats, oils, and grease (FOG) in the interceptor, which can contaminate the nearby water supply and pose a health risk. Additionally, grease trap backups can be avoided with routine grease trap cleaning and maintenance.
4. Saves Money in the Long Run
Grease and oil will not enter the septic tank with routine grease trap cleaning in Captiva, protecting the integrity of the entire system and extending the septic tank’s life.
Businesses can save money in the long run by avoiding fines and penalties for breaking the rules and guaranteeing their clients’ and employees’ safety and health.
We tried to summarize all points and share tips and tricks for grease trap cleaning on a regular basis. Since we don’t want our clients to spend some extra bucks on the grease trap cleaning by just ignoring it for a long time, we will suggest you reach out to our nearest office of Crews Environmental, or you can connect with us over call to book an appointment today.